Maximum reliability and minimum weight.

- these attributes are engineered into our new NEWMEN FADE hubs. In combination with the hub body geometry which allows for equal spoke lengths all around your wheelset, this results in a carefree highend straightpull hub. With the FADE driver even being durable enough for use with e-bikes, you won’t have to worry about your hubs at all. The hubs are made in Germany.

Weight front from 100g / rear from 230g

EUR 125,– (MSRP) Front
EUR 235,– (MSRP) Rear


Our new hub generation.
The most notable difference compared to the previous Evolution hubs is the newly designed and large dimensioned FADE driver. Inside the hub now are three pawls instead of the previous star ratchets. The develpment targets of our new FADE driver were:
- maintaining the same durability
- reduction of the freewheel noise
- further increasing reliability

The large diameter of the FADE driver reduces the forces which occur inside the freewheel. A particularly short and wide pawl design distributes the forces evenly onto a large area which helps with homogenous force transmission inside the hub. The ratchet ring has a special shape which significantly reduces noise. We intentionally went for 36 engagement points since more engagement points reduce hub durability noticeably on our testing rigs. Also we experienced more pedal feedback when experimenting with higher engagement hubs on full suspension bikes. As with the predecessor hubs, the body has more material around the critical areas compared to competitor hubs which results in increased durability and safety. We are convinced enough by the durability of these hubs to allow them to be used with any Ebike on the market. Of course all rear hubs are available with all three driver options (Microspline, XD, HG).



  • straightpull 28 hole
  • 6-hole disc mount
  • 36t FADE freewheel
  • 7075 aluminium


  • 15x110 6-bolt, 115g
  • 15x110 Centerlock, 100g


  • 12x148 6-bolt, 245g
  • 12x148 Centerlock , 230g
  • Microspline, XD or classic driver