
ADVANCED SL A.30
Make enduro bikes light again!
Going full enduro...with carbon fiber? Convinced by the durability
of our aluminium rims for enduro use compared to carbon fiber rims,
we started developing a 30mm carbon fiber rim initially meant for
trailbike use. The result of this project is the NEWMEN Advanced SL
A.30 rim with industry leading strength to weight ratio - even
strong enough for our EWS riders.
EUR 410,– (MSRP)
DESCRIPTION
Lower weight than our Evolution (aluminium) Sl A.30 rims with
higher strength than our Evolution SL E.G.30 rims. High wall
thickness around the whole rim profile and a special fibre layup at
the rim flanges in combination with 30mm inner width make for a
perfect trail and enduro rim. The relatively shallow rim profile
with 20mm height in combination with flexible Sapim D-Light spokes
grant the same comfort and grip which our aluminium wheels are
known for. Additionally the weight is lowered and the durability
increased. While during heavy use an aluminium rim always gets
small dents and flat spots which let the rim wear out over time,
the Advanced SL A.30 still runs perfectly true with even spoke
tension after thousands of meters of descending on an enduro bike.
On top of that the risk of pinch flats is greatly reduced due to
the wide 3.5mm rim flanges.
All carbon fiber rims are covered by a lifetime no-questions-asked 50% crash replacement - of course also for second or third owners.
All carbon fiber rims are covered by a lifetime no-questions-asked 50% crash replacement - of course also for second or third owners.
VARIANTEN
General Information
- engineered for enduro racing
- tubeless compatible hookless design
- unidirectional (UD) carbon
- required rim tape width 32mm
- max. systemweight 125kg
- max. spoke tension 1200N
Specificatons
wheelsize 29" / 27.5"
weight 460g / 440g
ETRTO 622-30c
spoke hole count 28
inner width 30mm
weight 460g / 440g
ETRTO 622-30c
spoke hole count 28
inner width 30mm
NEWMEN PRODUKTE KAUFEN.DEALER FINDEN
